| 1. |
Remove the under
cover. |
| 2. |
Remove the front muffler(A).
|
| 3. |
Disconnect the oxygen sensor
connector. |
| 4. |
Remove the heat protector(A).
|
| 5. |
Remove the exhaust manifold(A) and
gasket(B).
|
| 1. |
Install the exhaust manifold(A) and
gasket(B).
Tightening
torque
24.5 ~ 29.4Nm (2.5 ~ 3.0kgf.m, 18.1 ~
21.7lb-ft)
|
|
| 2. |
Install the heat protector(A).
Tightening
torque
16.7 ~ 21.6Nm (1.7 ~ 2.2kgf.m, 12.3 ~
15.9lb-ft)
|
|
| 3. |
Connect the oxygen sensor
connector. |
| 4. |
Install the front muffler(A).
Tightening
torque
29.4 ~ 39.2Nm (3.0 ~ 4.0kgf.m, 21.7 ~
28.9lb-ft)
|
|
| 5. |
Install the under
cover. | |
